Command Line Interface
596 1553-KDU 137 365 Uen D 2006-06-16
7.5.41 logging sendmail level
This command sets the severity threshold used to trigger alert messages.
Syntax
logging sendmail level <level>
level - One of the system message levels (page 585). Messages sent
include the selected level down to level 0. (Range: 0-7; Default: 7)
Default Setting
Level 7
Command Mode
Global Configuration
Command Usage
The specified level indicates an event threshold. All events at this level or
higher will be sent to the configured email recipients. (For example, using
Level 7 will report all events from level 7 to level 0.)
Example
This example will send email alerts for system errors from level 3 through 0.
Console(config)#logging sendmail level 3
Console(config)#
To Next Page
Loading...
