Command Line Interface
6091553-KDU 137 365 Uen D 2006-06-16
7.6.1 snmp-server
This command enables the SNMPv3 engine and services for all management
clients (that is, versions 1, 2c, 3). Use the no form to disable the server.
Syntax
[no] snmp-server
Default Setting
Enabled
Command Mode
Global Configuration
Example
show snmp
engine-id
Shows the SNMP engine ID PE 621
snmp-server view Adds an SNMP view GC 622
show snmp view Shows the SNMP views PE 623
snmp-server
group
Adds an SNMP group, mapping users to views GC 625
show snmp group Shows the SNMP groups PE 626
snmp-server user Adds a user to an SNMP group GC 628
show snmp user Shows the SNMP users PE 630
Console(config)#snmp-server
Console(config)#
Command Function Mode Page
To Next Page
Loading...
