Ericsson ECN330 - Page 644

Command Line Interface
638 1553-KDU 137 365 Uen D 2006-06-16
TACACS+ server. If the TACACS+ server is not available, the local user
name and password is checked.
Example
Related Commands
username (section 7.7.1 on page 633)
7.7.4 authentication enable
This command defines the authentication method and precedence to use when
changing from Exec command mode to Privileged Exec command mode with
the enable command (see page 532). Use the no form to restore the default.
Syntax
authentication enable {[local] [radius] [tacacs]}
no authentication enable
• local - Use local password only.
• radius - Use RADIUS server password only.
• tacacs - Use TACACS server password.
Default Setting
Local
Command Mode
Global Configuration
Console(config)#authentication login radius
Console(config)#