Ericsson ECN330 - Page 650

Command Line Interface
644 1553-KDU 137 365 Uen D 2006-06-16
Default Setting
2
Command Mode
Global Configuration
Example
7.7.9 radius-server timeout
This command sets the interval between the retransmitting of authentication
requests to the RADIUS server. Use the no form to restore the default.
Syntax
radius-server timeout <number_of_seconds>
no radius-server timeout
number_of_seconds - Number of seconds the ECN330-switch waits
for a reply before resending a request. (Range: 1-65535)
Default Setting
5
Command Mode
Global Configuration
Example
Console(config)#radius-server retransmit 5
Console(config)#
Console(config)#radius-server timeout 10
Console(config)#