Command Line Interface
646 1553-KDU 137 365 Uen D 2006-06-16
TACACS+ Client
Terminal Access Controller Access Control System (TACACS+) is a logon
authentication protocol that uses software running on a central server to control
access to TACACS-aware devices on the network. An authentication server
contains a database of multiple user name/password pairs with associated
privilege levels for each user or group that require management access to an
ECN330-switch.
Table 58 TACACS+ Client Commands
7.7.11 tacacs-server host
This command specifies the TACACS+ server. Use the no form to restore the
default.
Syntax
tacacs-server host <host_ip_address>
no tacacs-server host
host_ip_address - IP address of a TACACS+ server.
Default Setting
None
Command Function Mode Page
tacacs-server
host
Specifies the TACACS+ server GC 646
tacacs-server
port
Specifies the TACACS+ server network port GC 647
tacacs-server key Sets the TACACS+ encryption key GC 648
show tacacs-
server
Shows the current TACACS+ settings GC 648
To Next Page
Loading...
