Command Line Interface
652 1553-KDU 137 365 Uen D 2006-06-16
Command Usage
• Both HTTP and HTTPS service can be enabled independently on the
ECN330-switch. However, the HTTP and HTTPS servers cannot be
configured to use the same UDP port.
• If HTTPS is enabled, it must be indicated in the URL that is specified in
the browser: https://device[:port_number]
• When HTTPS is started, the connection is established in this way:
• The client authenticates the server using the server’s digital
certificate.
• The client and server negotiate a set of security protocols to use for
the connection.
• The client and server generate session keys for encrypting and
decrypting data.
• The client and server establish a secure encrypted connection.
A padlock icon should appear in the status bar for Internet Explorer 5.x
and Netscape Navigator 4.x or later versions.
• The following web browsers and operating systems currently support
HTTPS:
Table 60 HTTPS System Support
• To specify a secure-site certificate, see “Replacing the Default Secure-
site Certificate” on page 134. Also refer to the copy command on
page 561.
Web Browser Operating System
Internet Explorer 5.0 or later Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP
Netscape Navigator 6.2 or later Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP,
Solaris 2.6
To Next Page
Loading...
