Command Line Interface
7771553-KDU 137 365 Uen D 2006-06-16
Default Setting
Fast Ethernet: 100 Mbps
Gigabit Ethernet: 1000 Mbps
Command Usage
• Use the command without specifying a rate to restore the default rate.
• Use the no form to restore the default status of disabled.
•Use the vlan option to configure the input rate limit for a port within the
specified VLAN.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
Console(config)#interface ethernet 1/1
Console(config-if)#rate-limit input 64000
Console(config-if)#rate-limit input 6400 vlan 1
Console(config-if)#
To Next Page
Loading...
