Command Line Interface
7911553-KDU 137 365 Uen D 2006-06-16
7.14.4 mac-address-table aging-time
This command sets the aging time for entries in the address table. Use the no
form to restore the default aging time.
Syntax
mac-address-table aging-time <seconds>
no mac-address-table aging-time
seconds - Time in number of seconds (10-1000000; 0 to disable
aging).
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding
information.
Example
Console(config)#mac-address-table aging-time 100
Console(config)#
To Next Page
Loading...
