Configuring the ECN330-switch
771553-KDU 137 365 Uen D 2006-06-16
CLI – Use the following command to display version information.
6.3.6 Displaying Bridge Extension Capabilities
The Bridge MIB includes extensions for managed devices that support Multicast
Filtering, Traffic Classes, and Virtual LANs. These extensions can be accessed
to display default settings for the key variables.
Field Attributes
• Extended Multicast Filtering Services – The ECN330-switch does
not support the filtering of individual multicast addresses based on
GMRP (GARP Multicast Registration Protocol).
• Traffic Classes – The ECN330-switch provides mapping of user
priorities to multiple traffic classes. (Refer to “Class of Service
Configuration” on page 324.)
• Static Entry Individual Port – The ECN330-switch allows static
filtering for unicast and multicast addresses. (Refer to 6.9.1 "Setting
Static Addresses" 227.)
• VLAN Learning – The ECN330-switch uses Independent VLAN
Learning (IVL), where each port maintains its own filtering database.
• Configurable PVID Tagging – The ECN330-switch allows the default
Port VLAN ID (PVID used in frame tags) and egress status (VLAN-
Tagged or Untagged) on each port to be overriden. (Refer to “VLAN
Configuration” on page 272.)
Console#show version
Unit 1
Serial Number: A521002166
Hardware Version: R0B
EPLD Version: 1.02
Number of Ports: 28
Main Power Status: Up
Agent (Master)
Unit ID: 1
Loader Version: 1.2
Boot ROM Version: 1.1
Operation Code Version: 3.15
Console#
To Next Page
Loading...
