Command Line Interface
8391553-KDU 137 365 Uen D 2006-06-16
Table 88 show eaps - detailed display description
Field Description
EAPS Enabled Shows whether EAPS is enabled on the ECN330-
switch.
Number of EAPS
instances
Shows the number of EAPS instances configured on
the ECN330-switch.
EAPSD-Bridge
links
The number of Protected VLANs configured on the
EAPS domain.
Name Displays the name of each domain followed by a brief
list of status information
State See Table 87 on page 837.
Enabled Shows if the specified domain is enabled.
Pimary port Shows the primary port.
Secondary port Shows the secondary port.
Hello Timer
interval
The interval at which the master node sends health-
check packets on the domain ring.
Fail Timer
interval
The time the master node waits for a health-check
packet before declaring a break in the ring.
Preforwarding
Timer interval
This EAPS domain is running, and both ports on the
transit node are up, but the new link port is in a
temporary BLOCKED state.
This delay is used by a transit node after receiving a
message from the master node to bring the link up.
This delay is used to ensure that the ring is stable and
no more state change messages are being sent from
the master node before changing the primary port on
the transit node to forwarding state.
Control Vlan Shows the name and VLAN ID of the Control VLAN.
Protected Vlan Shows the name and VLAN ID of Protected VLANs.
To Next Page
Loading...
