Introduction to this Guide
31553-KDU 137 365 Uen D 2006-06-16
• Added information to clarify the use of auto-negotiation for Gigabit
Ethernet ports in
section 7.9.3 - section 7.9.6.
• ip igmp snooping (Interface Configuration), section 7.21.2
1.2.3 Version B
This is the second version of this guide. It includes the following changes:
• Access Control List in section 4.1 and section 6.6.1 – Changed the
number of allowed ACL rules.
• Local and remote engine ID in section 6.4.4.1, section 6.4.4.2 and
section 7.6.8 – Changed the allowed string length for the engine ID to
10 - 64 characters.
• SNMPv3 group in section 6.4.4.5 and section 7.6.12 – Changed the
allowed string length for Read View, Write View and Notify View to 16
characters.
• SNMPv3 view in section 6.4.4.6 and section 7.6.10 – Changed the
allowed string length for view name to 16 characters.
• Ethernet Automatic Protection Switching Configuration, section 6.11 –
A note was added to the end of the Functional Description.
• Creating VLANs, section 6.12.1.7 – Changed the number of allowed
VLANs to 4094.
• MPLS uplink port in section 6.13.2 and section 7.18.1 – Changed the
allowed port range to 1-27.
• Configuring a Class Map, section 6.15.1.1 – Changed the maximum
string length for Class Name to 16 characters, and the maximum string
length for the description of this parameter to 64 characters.
• Creating QoS Policies, section 6.15.1.2 – Changed the maximum string
length for Policy Name to 16 characters, and the maximum string length
for the description of this parameter to 64 characters.
• Configuring IGMP Snooping and Query Parameters, section 6.16.2.1 –
Added a note to Command Usage.
• Displaying Multicast Group Information, section 6.16.3.2 – Add a note
to Command Usage.