Command Line Interface
9151553-KDU 137 365 Uen D 2006-06-16
7.19.15 map ip dscp (Interface Configuration)
This command sets IP DSCP priority (Differentiated Services Code Point
priority). Use the no form to restore the default table.
Syntax
map ip dscp <dscp-value> cos <cos-value>
no map ip dscp
• dscp-value - 8-bit DSCP value. (Range: 0-255)
• cos-value - Class-of-Service value (Range: 0-7)
Default Setting
The DSCP default values are defined in the following table. Note that all the
DSCP values that are not specified are mapped to CoS value 0.
Table 104 Mapping IP DSCP to CoS Values
Command Mode
Interface Configuration (Ethernet, Port Channel)
IP DSCP Value CoS Value
00
81
10, 12, 14, 16 2
18, 20, 22, 24 3
26, 28, 30, 32, 34, 36 4
38, 40, 42 5
48 6
46, 56 7
To Next Page
Loading...
