FOR-A FA-9500 - Conv1 VI out; Conv1 Wss out

93
5-16-2. CONV1 VI OUT
Displays whether the RP186 VI ancillary data is inserted into CONV 1 output video signal.
 When no RP186 VI is in the CONV1 output video signal
CONV1 VI OUT 673
RP186 VI:ABSENT
If ANC MODE in 5-10-9 CONV1 ANC SET is set to H/V ANC, the state of the V ANC setting
(PASS or BLANK) is displayed.
 When RP186 VI is in the CONV1 output video signal
CONV1 VI OUT 673
RP186 VI:PRESENT
AFD:02 SS:02
BOX 16:9 TOP
D1:12 D2:02 D3:02
Displays the status of RP186 VI (Video Index) Class1.
AFD: Active Format Description is displayed in hexadecimal format.
SS: Scanning System is displayed in hexadecimal format.
The detected AFD type is shown on the third row.
D1-D3: Detected Data are displayed in hexadecimal format.


See section 20-6 “AFD Code Abbreviations” for details on AFD types.
5-16-3. CONV1 WSS OUT
 When no BT1119-2 WSS is in the CONV1 output video signal
CONV1 WSS OUT 674
BT1119 WSS:ABSENT
If ANC MODE in 5-10-9 CONV1 ANC SET is set to H/V ANC, the state of the V ANC setting
(PASS or BLANK) is displayed.
 When BT1119-2 WSS is in the CONV1 output video signal
CONV1 WSS OUT 674
BT1119 WSS： PRESENT
AFD:04
BOX 16:9 TOP
BIT13-0:0004
Displays the status of BT1119-2 WSS.
AFD: Active Format Description is displayed in hexadecimal format.
SS: Scanning System is displayed in hexadecimal format.
The detected AFD type is shown on the third row.
D1-D3: Detected Data are displayed in hexadecimal format.


See section 20-6 “AFD Code Abbreviations” for details on AFD types.
Menu button
STATUS
OTHER
Menu button
STATUS
OTHER