Need help?Do you have a question about the FOR-A FA-9520 and is the answer not in the manual?
General| Category | Signal Processor |
|---|---|
| Video Inputs | 3G/HD/SD-SDI x 2 |
| Video Outputs | 4x SDI (BNC) |
| Audio Inputs | Embedded in SDI |
| Audio Outputs | Embedded in SDI |
| Processing | Frame Synchronizer |
| Control | SNMP |
| Video Standards | SD/HD/3G-SDI |
Covers critical safety guidelines for power, grounding, operation, and transportation.
Details warnings regarding internal circuitry access and potential operational hazards.
Advises on installation parts, grounding, and consumable replacement.
Provides guidance on periodic replacement of consumables and contacting dealers.
Details the items included with the FA-9520 and its optional accessories.
Guides on physically installing the unit into a rack and securing the power cord.
Provides step-by-step instructions for installing the FA-95DACBL digital audio expansion option.
Details pin assignments for the FA-95AIO connector and internal switch settings.
Lists the minimum computer specifications necessary for operating FA-9520 software.
Steps for turning on the FA-9520 and verifying initial status indicators.
Explains basic controls, modes (NORMAL/LIVE SAFE), and accessing menus via buttons.
Details the functionality of arrow and menu buttons for navigating through system menus.
Explains how to jump directly to specific menus by holding down designated buttons.
Guides on modifying parameter values using the F1-F4 control knobs.
Describes using UNITY buttons to restore parameter settings to their factory defaults.
Explains using LOCK buttons to switch or disable FS1/FS2 operations and settings.
Adjusts video level, chroma, setup/black, and hue for image quality.
Controls white, black, gamma levels, and color correction modes for image enhancement.
Configures automatic level adjustment, sample area, and response speed for video signals.
Manages clipping levels for YPbPr, RGB, and composite video signals.
Selects input video signals and defines loss mode operations.
Assigns video signals to output connectors and specifies output formats.
Configures video options including Logo Generator and Keyer settings.
Manages frame synchronizer modes, phase, and freeze functions for video signals.
Adjusts SC Phase, Comb Filter, NR Level, Cross Color, VITS, and NTSC/PAL modes.
Configures embedded SDI audio signal gain, mono sum, and alignment.
Sets AES audio input/output gain, hysteresis, mono sum, and I/O configuration.
Manages analog audio input/output levels, gain, mono sum, and system termination.
Adjusts master, embedded, AES, and analog audio output gains for optimal levels.
Assigns embedded, AES, and analog audio signals to specific output channels.
Manages delay settings for embedded, AES, and analog audio signals to ensure synchronization.
Configures downmix modes for surround and stereo audio signals.
Sets SRC mode, polarity, and Dolby modes for audio processing.
Configures Dolby E/Digital Decoder and Encoder settings for advanced audio processing.
Measures and adjusts audio loudness to target levels based on selected standards.
Configures basic audio system features like Fade In/Out and Digital Audio settings.
Adjusts synchronization modes, phase, video position, and freeze functions.
Manages ancillary data detection, embedding, and loss mode settings for FS1/FS2.
Configures general purpose interface pins for input or tally output functions.
Manages event memory, backups, MIB downloads, and unit information.
Monitors unit, video, audio, and ancillary data statuses for system health.
Configures IP, subnet mask, gateway, SNMP, and user settings for network access.
Illustrates the audio downmix process for surround and stereo signals.
Maps Dolby E channels to output configurations for the decoder/encoder.
Provides procedures for installing FA-95DACBL and FA-95AIO expansion cards.
Lists minimum computer specifications for operating FA-9520 software.
Details ancillary data packet names, DID/SDID, and their descriptions.
Explains AFD codes and aspect ratio conversion rules for video signals.
Covers CEA608, S334-1 SD, and CEA708 HD closed captioning standards.
Guides on checking and resetting settings after option card changes.
Explains alerts related to option card status in expansion slots.
Lists detailed technical specifications of the FA-9520 unit.
Provides the physical dimensions of the FA-9520 unit in millimeters.
To Next Page
