FOR-A FA-9520 User Manual

273
22. Verification After Option Card Removal/Replacement
An alarm message described in section 22-1 Alert may appear when turning the FA-9520 on
after removing or changing the location of the FA-95D-D, FA-95DE-E, FA-95AIO, or FA-95ALA
option. Press the F1 UNITY button to return to the normal startup screen.
The alarm message indicates settings, set while the FA-95D-D, FA-95DE-E, FA-95AIO, or
FA-95ALA option is being installed into option slots A and B, have not be retained due to the
removal or change of the option or options. In such case, the settings that are only available with
those options will be reset to default. See section 22-2 “Verification After Dolby Option
Removal/Replacement” and correct any necessary settings, if you have removed the FA-95D-D
or FA-95DE-E. See section 22-3 “Verification After FA-95AIO Removal/Replacement” and
correct the necessary settings, if you have removed the FA-95AIO. See section 22-4 “Verification
After FA-95ALA Removal/Replacement” and correct the necessary settings, if you have
removed the FA-95ALA.
The alarm message appears only once when starting the FA-9520 after removing or changing
the location of the FA-95D-D, FA-95DE-E, FA-95AIO, or FA-95ALA option.
22-1. Alert
SLOT O P T C H A N G E D
904
----- W A R N I N G ! -----
O P T I O N C A R D M I S S I N G !
C H E C K S E T T I N G S
P U S H F 1 T O C O N T I N U E
22-2. Verification After Dolby Option Removal/Replacement
Reset the following menu items if the FA-95D-D option card is removed or moved.
 ASSIGN settings for CH 1 – CH 16 in the EMB1 OUT REMAP menu (Sec. 6-5-1)
 ASSIGN settings for CH 1 – CH 8 in the EMB2 OUT REMAP menu (Sec. 6-5-2)
 ASSIGN settings for CH 1 – CH 4 in the AES OUT REMAP menu (Sec. 6-5-3)
 ASSIGN settings for CH 1 – CH 4 in the ANALOG OUT REMAP menu (Sec. 6-5-4)
 ASSIGN settings for CH 1 – CH 4 in the LOUDNESS CHANNEL ASSIGNMENT menu
(Sec. 6-10-2-4)
Reset the following menu items if the FA-95DE-E option is removed.
 ASSIGN settings for CH 1 – CH 16 in the EMB1 OUT REMAP menu (Sec. 6-5-1)
 ASSIGN settings for CH 1 – CH 8 in the EMB2 OUT REMAP menu (Sec. 6-5-2)
 ASSIGN settings for CH 1 – CH 8 in the AES OUT REMAP menu (Sec. 6-5-3)
 OUTPUT settings in the Dolby AUX OUT menu (Sec. 6-10-1-1)
 ASSIGN settings for CH 1 – CH 8 in the LOUDNESS CHANNEL ASSIGNMENT menu
(Sec. 6-10-2-4)
22-3. Verification After FA-95AIO Removal/Replacement
Reset the following menu items if the FA-95AIO option card is removed or moved.
 IN SEL settings in the FS INPUT SELECT menu (Sec. 5-6-1)
 INPUT/BY-PASS settings in the GPI SETTING menu (Sec. 7-6)

FOR-A FA-9520 Specifications

General

Brand	FOR-A
Model	FA-9520
Category	Signal Processors
Language	English