FOR-A FA-9520 - Dolby ENCODER INPUT

129
6-10-1-6. Dolby ENCODER INPUT
This menu is displayed only if FA-95DE-E option is installed in option slot A.
D o l b y E N C I N A
186
INPUT :D I R E C T I N S E L
C H S E L : C H 1
ASSIGN:E M B 1 C H 1
Menu names and menu pages for the option in slot B change as shown below.
D o l b y E N C I N B
236
Parameter
Default
Setting range
Description
INPUT
DIRECT
IN SEL
DIRECT IN SEL
Dolby DEC OUT
Selects a signal to be input to the Dolby
encoder.
*1
DIRECT IN SEL: SOURCE channel
signals of the FA-9520.
Dolby DEC OUT: Output signal from the
Dolby decoder
CH SEL
CH 1
CH 1-8
Selects a channel to which to assign a
signal.
ASSIGN
EMB1
CH1
*2
When DIRECT IN SEL
is selected:
EMB1 CH1 - 16
EMB2 CH1 - 16
AES CH1 - 8
ANALOG CH1 - 4
DOWNMIX1-L
DOWNMIX1-R
DOWNMIX2-L
DOWNMIX2-R
500Hz TONE
1KHz TONE
SILENCE
When INPUT is set to DIRECT IN SEL:
EMB1 CH1 - 16: FS1 embedded audio
signals.
EMB2 CH1 - 16: FS2 embedded audio
signals.
AES CH1 – 8: AES audio signals
ANALOG CH1 – 4: Analog audio signals
DOWNMIX-L/R: Down mixed signal
generated from SOURCE channel signals.
500Hz/1KHz TONE: Test signal (TONE)
SILENCE: Mute signal
LOUD1, 2A, B-L-Rs: Loudness controlled
signal
When INPUT is set to Dolby DEC OUT:
Dolby DEC1-8: PCM signal output from
the Dolby decoder
DolbyDM-L/R: Down mixed signal
generated from Dolby-decoded PCM
signal
500Hz/1KHz TONE: Test signal (TONE)
SILENCE: Mute signal
LOUD1A -
*3
LOUD2A -
*3
LOUD1B -
*4
LOUD2B -
*4
L
R
C
LFE
Ls
Rs
When Dolby DEC OUT
is selected:
Dolby DEC 1-8
DolbyDM-L
DolbyDM-R
500Hz TONE
1KHz TONE
SILENCE
*1 DIRECT IN SEL and Dolby DEC OUT settings are retained until changed. When an INPUT
setting, DIRECT IN SEL or Dolby DEC OUT, is changed, CH1-8 signal assignments will be
changed to that of the INPUT selection. DIRECT IN SEL and Dolby DEC OUT signals
cannot be input to the Dolby encoder together. Dolby Digital signal output from the Dolby
decoder, Dolby DEC OUT, cannot be encoded to the Dolby E signal.
*2 EMB1 channels corresponding to CH1-8 will be the default value.
(CH1: EMB 1 CH1/2 - CH8: EMB1 CH15/16)
If INPUT is set to Dolby DEC OUT, the settings will be; CH1: Dolby DEC 1 - CH8: Dolby
DEC 8.
*3 Shown if the FA-95ALA is installed in slot A.
*4 Shown if the FA-95ALA is installed in slot B.
Menu button
VIDEO OP
AUDIO OP