FOR-A FA-9520 - Video out Status; Video Option Output

84
5-10-4. VIDEO OUT STATUS
Displays the status of output video signals.
V I D E O O U T S T A T U S
511
SDI1/2： 1 0 8 0 / 5 9 i
SDI3/4： 1 0 8 0 / 5 9 i
C O M P O S I T E : 5 2 5 / 6 0
Parameter
Display
Description
SDI1/2
525/60
625/50
1080/59i
1080/50i
720/59p
720/50p
1080/23PsF
1080/24PsF
1080/59p
1080/50p
BY-PASS
DISABLE
Displays the video format of the SDI1/2 output
signals.
Displays “DISABLE” if there is no signal output.
SDI3/4
Same as above
Displays the video format of the SDI3/4 output
signals.
Displays “DISABLE” if there is no signal output.
COMPOSITE
525/60
625/50
BY-PASS
DISABLE
PAL-M
Displays the video format of the COMPOSITE
output signal.
Displays “DISABLE” if there is no signal output.
Displays “PAL-M” if 5-9-15 “COMPOSITE SET2”
is enabled, and the format of the output video
signal from COMPOSITE OUT is 525/60.
5-10-5. VIDEO OPTION OUTPUT
This menu is accessible only if the FA-95AIO option is installed in slot A or B.
V I D E O O P O U T N P U T
512
O P A : 5 2 5 / 6 0
M O D E A : Y P b P r S M P T E
O P B : 5 2 5 / 6 0
M O D E B : Y P b P r S M P T E
Parameter
Display
Description
OP A
525/60
625/50
1080/59i
1080/50i
720/59p
720/50p
1080/23PsF
1080/24PsF
BY-PASS
DISABLE
Displays the output video format of the FA-95AIO
installed in slot A.
Displays “DISABLE” if there is no signal output.
MODE A
YPbPr SMPTE
YPbPr BETACAM
RGB
Y/C
*1
Displays the output signal format of the FA-95AIO
installed in slot A.
See section 5-7-2 “AIO A ASSIGN” for details on
signal format settings.
OP B
Same as OP A
Displays the output video format of the FA-95AIO
installed in slot B.
Displays “DISABLE” if there is no signal output.
MODE B
Same as MODE A
Displays the output signal format of the FA-95AIO
installed in slot B.
See section 5-7-2 “AIO A ASSIGN” for details on
signal format settings.
*1 The output video format for Y/C mode is either 525/60,625/50, or PAL-M.
Menu button
STATUS
OTHER
Menu button
STATUS
OTHER