FOR-A FA-9520 - System Requirements

245
16-2. FA-95AIO Switch Settings
IMPORTANT
Note that internal switch settings should not be changed from factory defaults. If you
have accidentally changed the setting, refer to the Dipswitch S1 settings below to
return to the factory default setting.
Futher note that adjustments and maintenance should only be performed by qualified
technical personnel familiar with FOR-A equipment.
WARNING
Do not access MU internal cards or make connections with unit power ON. Always
power OFF the main unit prior to accessing the interior.
Do not touch other components on the card to avoid damage from static electricity.
Dipswitch S1 settings
Pin No.
Default
Description
1
OFF
Do not change
2
OFF
Do not change
3
OFF
Do not change
4
OFF
Do not change
5
OFF
Do not change
6
OFF
Do not change
7
OFF
Do not change
8
OFF
Do not change
17. System Requirements
To use with the FA-9520, your computer must meet the following requirements.
OS
Windows® XP operating
system SP2 or later
Professional (32bit)
Windows Vista®
operating system
Business (32bit)
Windows® 7 operating
system
Professional
(32bit/64bit)
Browser
Firefox®20.0
Firefox®20.0
Windows® Internet
Explorer 10,
Firefox®20.0
CPU
Pentium® 4 processor
2.8GHz or higher
Intel® Core™2 Duo
processor
2GHz or higher
Intel® Core™2 Duo
processor
2GHz or higher
Memory
512MB or more
2GB or more
2GB or more
Display
1280×1024 pixels or more resolution, 24-bit full-color
Network
Ethernet (100BASE-TX/1000BASE-T), 1 port or more
Network cable
Enhanced Category 5 or higher
Network protocol
SNMPv2c, HTTP
IMPORTANT
When using Internet Explorer 8, Windows Updates after 6/13/2011 must be
downloaded for proper performance. It is highly recommended to keep your computer
updated with the latest Windows Updates.
PCs that do not meet the above system requirements may not properly display web
pages.
We recommend the use of a Firefox web browser.