FOR-A FA-9520 - Expansion Slots A; B Alert

274
22-4. Verification After FA-95ALA Removal/Replacement
Reset the following menu items if the FA-95ALA option card is removed or moved.
 ASSIGN settings for CH 1 – CH 16 in the EMB1 OUT REMAP menu (Sec. 6-5-1)
 ASSIGN settings for CH 1 – CH 8 in the EMB2 OUT REMAP menu (Sec. 6-5-2)
 ASSIGN settings for CH 1 – CH 8 in the AES OUT REMAP menu (Sec. 6-5-3)
 ASSIGN settings for CH 1 – CH 4 in the ANALOG OUT REMAP menu (Sec. 6-5-4)
 ASSIGN settings for CH 1 – CH 4 in the Dolby ENCODER INPUT menu (Sec. 6-10-1-6)
23. Expansion Slots A / B Alert
O P T B U S C H E C K
220
S L O T A : F A I L E D
S L O T B : S T A T U S O K
The above alert that appears after turning on the FA-9520 indicates an alarm or alarms for an
option card or cards installed in the expansion slot A and/or B.
This indication appears only after powering on the FA-9520.
Indicates failure of the option card installed in the slot indicated as “FAILED”.
If this indication appears, turn the power of the unit off immediately, and contact your service
agency or distributor.