FOR-A FA-9520 User Manual

118
6-7-1. DOWN MIX1 ASSIGN
D O W N M I X 1 A S S I G N
162
C H S E L : L E F T
ASSIGN: LEFT: E M B 1 C H 1
Parameter
Default
Setting range
(Steps)
Description
CH SEL
LEFT
LEFT(L)
RIGHT(R)
CENTER(C)
LEFT SRRND(LS)
RIGHT SRRND(RS)
Selects a channel to be
downmixed in downmix
2 for which to assign a
source audio.
ASSIGN
LEFT:EMB1 CH1
RIGHT:EMB1 CH2
CENTER:EMB1 CH3
LEFT SRRND: EMB1 CH5
RIGHT SRRND: EMB1 CH6
EMB1 CH1 - 16
EMB2 CH1 - 16
AES CH1 - 8
ANALOG CH1 - 4
Selects an audio signal
to be assigned to the
channel that is selected
under CH SEL.
If the same audio signal is selected for multiple CH SEL channels, or a NON-PCM signal is
assigned to an audio channel, the menu will be indicated with an “*“, i.e. „*EMB1 CH1“, and
DOWNMIX-L and DOWNMIX-R will be muted.
NOTE
To output downmixed audio signals, see sections 6-5-1 “EMB1 OUT REMAP” to 6-5-4
“ANALOG OUT REMAP”.
Menu button
IN SEL
DOWNMIX

FOR-A FA-9520 Specifications

General

Brand	FOR-A
Model	FA-9520
Category	Signal Processors
Language	English