243
16-2. FA-95AIO Switch Settings
IMPORTANT
Note that internal switch settings should not be changed from factory defaults. If you
have accidentally changed the setting, refer to the Dipswitch S1 settings below to
return to the factory default setting.
Futher note that adjustments and maintenance should only be performed by qualified
technical personnel familiar with FOR-A equipment.
WARNING
Do not access MU internal cards or make connections with unit power ON. Always
power OFF the main unit prior to accessing the interior.
Do not touch other components on the card to avoid damage from static electricity.
Dipswitch S1 settings
Pin No. Default Description
1 OFF Do not change
2 OFF Do not change
3 OFF Do not change
4 OFF Do not change
5 OFF Do not change
6 OFF Do not change
7 OFF Do not change
8 OFF Do not change
To Next Page
Loading...
