215
9-7. Status Display
Click the Status tab at the top of the page. The Unit/Video Status page will be displayed. To go to
the Audio Status page, click Audio Status at the top left of the page. In the same way, click
Unit/Video Status to go to the Unit/Video Status page, and click Unit Information to go to the
Unit Information page. Click Changeover Status to go to the Changeover Status page. The
Changeover Status page will open only if the FA-95CO option is installed.
9-7-1. Unit/Video Status
The video and unit statuses are shown on the Unit/Video Status page.
If the user name and password are not set in the USER SETTING page (see section 9-8-5),
the Logout is not shown. Click Refresh to refresh the page.
Click
To Next Page
Loading...
