80
5-13. Various Signal Status Display (STATUS)
5-13-1. UNIT ALARM
UNIT ALARM 501
FAN1:NORMAL
FAN2:NORMAL
DC POWER1:NORMAL
DC POWER2:NORMAL
Parameter Display Description
FAN1
NORMAL
STOPPED
Displays the status of FAN1.
NORMAL: Operating normally.
STOPPED: FAN1 has stopped.
Turn the unit power OFF, and contact your dealer
if the replacement is needed.
FAN2
NORMAL
STOPPED
Displays the status of FAN2.
NORMAL: Operating normally.
STOPPED: FAN2 has stopped.
Turn the unit power OFF, and contact your dealer
if the replacement is needed.
DC POWER1
*1
NORMAL
ABNORMAL
Displays the status of DC POWER1.
NORMAL: The power supply is normal.
ABNORMAL: DC POWER1 has failed.
A power failure has occurred. Although the unit is
working properly, It is recommended that the
power supply unit be replaced. Contact your
dealer if a replacement is necessary.
DC POWER2
*1
NORMAL
ABNORMAL
Displays the status of DC POWER2.
NORMAL: The power supply is normal.
ABNORMAL: DC POWER2 has failed.
A power failure has occurred. Although the unit is
working properly, It is recommended that the
power supply unit be replaced. Contact your
dealer if a replacement is necessary.
*1 Displayed only if FA-95PS is installed.
Menu button
STATUS
OTHER
To Next Page
Loading...
