FOR-A FA-9500 - 8. Event Memory; 8-1. EVENT LOAD

131
8. Event Memory
The FA-9500 can store 100 event memories, as well as sets of settings, each of which are stored for
each format.
Every press of the EVENT button alternates the menus: EVENT LOAD (lit green), EVENT SAVE (lit
red)，and EVENT SETUP(lit orange). To go to the desired page, press the EVENT button a few
times, or press the EVENT button once and the up or down single arrow button to move between
EVENT pages.
8-1. EVENT LOAD
EVENT LOAD 191
NO.: VIDEO FORMAT
LOAD START F2 UNITY
FORMAT:1080/59i
Parameter Default Setting range Description
NO.
VIDEO
FORMAT
VIDEO FORMAT
*2
DEFAULT
*1
EVENT1 -
EVENT100
Selects the number of an event
you want to load.
LOAD START F2
UNITY
- -
Loads the event that is selected
under NO. when the F2 UNITY
button is pressed.
- - -
Displays the signal format if NO. is
set to VIDEO FORMAT.
*1 DEFAULT loads the default settings.
*2 VIDEO FORMAT loads the settings that are stored for the respective video formats the
FA-9500 uses. The current video format is displayed on the third row.
The EVENT LOAD menu is disabled and appears as shown below if AUTO LOAD is set to
ENABLE in the EVENT SETUP menu (8-3).
To enable the EVENT LOAD menu, set AUTO LOAD to DISABLE.
EVENT LOAD 191
NO.:----
AUTO LOAD ENABLE!
Menu button
EVENT