29
5-3-6. CONV1 SIDE RGB
CONV1 SIDE RGB 10
RED : 0
GREEN: 0
BLUE : 0
GROUP ADJUST
Parameter Default Setting range Description
RED, GREEN, BLUE
(Background color)
0 0 - 255
Sets background color that will be visible if
the converted image is set smaller than
original in CONV1 SIZE/POS (5-3-3).
R, G, and B components can be adjusted
separately.
F4 control knob allows you to adjust R, G,
and B at the same time.
If the CONV1 mode is set to BY-PASS, the CONV1 SIDE RGB setting cannot be changed.
Also, it cannot be changed if the conversion is set to the formats indicated as (BY-PASS) in
the CONV1 Conversion Table (see section 5-3-2). In both cases, the menu as shown below
will be displayed.
CONV1 IMPROVE 10
RED : NOT ADJUST
GREEN: NOT ADJUST
BLUE : NOT ADJUST
Menu button
CONV1
ANALOG
To Next Page
Loading...
