FOR-A FA-9500 - Analog Audio Output Settings

184
9-3-13. Analog Audio Output Settings
Clicking block (13) on the audio block diagram opens the Analog Audio Output dialog box.
After completing the settings, click Close to close the dialog box.
Click Refresh to update the settings.
Click Unity to reset to the default settings.
Click to increase the value by the smallest steps.
Click to decrease the value by the smallest steps.
 Analog Audio Output Gain
Parameter Default
Setting range
(Steps)
Description
Master 0.0dB
-20.0 - +20.0 dB
(0.1 dB)
Sets the output gain for all analog
audio output channels.
 Analog Audio Output Gain Set (Settings)
Parameter Default
Setting range
(Steps)
Description
CH 1-CH 4 0.0dB
-20.0 - +20.0 dB
(0.1 dB)
Sets output gain per analog audio
output channels.
 Analog Audio Output Level
Parameter Default
Setting range
(Steps)
Description
CH 1-CH 4 +4dBm
-10dBm
0dBm
+4dBm
+8dBm
Sets the output signal level for
analog audio output channels.
+
-