FOR-A FA-9500 - 5. VIDEO Menus; 5-1. VIDEO PROC AMP (PROCESS); 5-2. COLOR CORRECTOR (C.C.); 5-2-1. WHITE LEVEL

19
5. VIDEO Menus
Make the menu buttons light up green using the VIDEO/AUDIO button.
(Pressing the button while the buttons are lit orange turns the lights green.)
Then the menus displayed on the upper row on each menu button can be selected.
5-1. VIDEO PROC AMP (PROCESS)
VIDEO PROC AMP 1
VIDEO LEVEL : 100.0%
CHROMA LEVEL: 100.0%
SETUP/BLACK : 0.0%
HUE : 0.0°
Parameter Default
Setting range
(Steps)
Description
VIDEO LEVEL 100.0%
0.0 - 200.0%
(0.1％)
Adjusts the video level.
CHROMA LEVEL 100.0%
0.0 - 200.0%
(0.1％)
Adjusts the chrominance level.
SETUP/BLACK 0.0%
-20.0 - 100.0%
(0.1％)
Adjusts the black level.
HUE 0.0°
-179.8 - 180.0°
(0.2°)
Adjusts the color phase.
5-2. COLOR CORRECTOR (C.C.)
Allows you to adjust the Color corrector settings.
5-2-1. WHITE LEVEL
WHITE LEVEL 2
RED : 100.0%
GREEN: 100.0%
BLUE : 100.0%
GROUP ADJUST
Parameter Default
Setting range
(Steps)
Description
RED, GREEN, BLUE
(RGB White Level)
100.0%
0.0 - 200.0%
(0.5%)
Adjusts the white level of R, G,
and B components separately.
GROUP ADJUST
(Group Adjustment)
100.0%
0.0 - 200.0%
(0.5%)
Adjusts the white level of R, G,
and B components all together
while retaining the proportion of
the separately adjusted levels.
If MODE is set to SEPIA in the COLOR CORRECT (C.C.) menu (5-2-4), the menu as shown
below will be displayed.
WHITE LEVEL 2
RED :NOT ADJUST
GREEN:NOT ADJUST
BLUE :NOT ADJUST
C.C MODE IS SEPIA
*1
*1 If AVO is enabled, the message “AVO IS USING IT” will be displayed.
Menu button
PROCESS
SDI AUDIO
Menu button
VIDEO
AUDIO
Menu button
CC
AES AUDIO