FOR-A FA-9500 - Conversion Setting Version Differences

268
 SMPTE RP186-2008 VI AFD aspect ratio table
Description AFD Code
RESERVED Reserved 0000
RESERVED Reserved 0001
BOX 16:9 TOP Box 16:9 (top) 0010
BOX 14:9 TOP Box 14:9 (top) 0011
BOX>16:9 CTR Box > 16:9 (center) 0100
RESERVED Reserved 0101
RESERVED Reserved 0110
RESERVED Reserved 0111
AS THE CD FRM Active format is the same as coded frame 1000
4:3 CTR 4:3 (center) 1001
16:9 CTR 16:9 (center) 1010
14:9 CTR 14:9 (center) 1011
RESERVED Reserved 1100
4:3 WITH 14:9 PRTD 4:3 (with shoot and protect 14:9 center) 1101
16:9 WITH 14:9 PRTD 16:9 (with shoot and protect 14:9 center) 1110
16:9 WITH 4:3 PRTD 16:9 (with shoot and protect 4:3 center) 1111
 ITU-R BT.1119-2 WSS aspect ratio table
Description AFD Code
F 4:3 full format 4:3 1000
BOX 14:9 CTR box 14:9 centre 0001
BOX 14:9 TOP box 14:9 top 0010
BOX 16:9 CTR box 16:9 centre 1011
BOX 16:9 TOP box 16:9 top 0100
BOX>16:9 CTR box 16:9 centre 1101
F 14:9 CTR PRTD full format 14:9 centre shoot and protect 14:9 1110
F 16:9 AMRPH full format 16:9 anamorphic 0111
20-7. Conversion Setting Version Differences
Conversion settings in the FA-9500 ver. 6.00 and higher have been changed, due to added
S2016-3 AFD support, as shown in the table below.
Former version settings
Later version settings
SD INPUT ASPECT
*1
ASPECT settings
*2
Up conversion
4:3 4:3 16:9 P 14:9
14:9 4:3 16:9 P 14:9
16:9 4:3
16:9 F 16:9
16:9 F PRTD
SQUEEZE 16:9
16:9 F 16:9
16:9 F PRTD
Down conversion
4:3
4:3 F 4:3
14:9 4:3 L 14:9
16:9 4:3 L16:9PRTD
SQUEEZE
16:9 F 16:9
16:9 F PRTD
*1 See section 5-7-2 SD INPUT ASPECT for details.
*2 See section 5-3-1 CONV1 U/D MODE for details.