183
AES Audio Mono Sum
Parameter Default
Setting range
(Steps)
Description
CH 1/2-CH 7/8 Disable
Disable
Enable
Enable: Outputs the stereo pair
channels as a mono sum.
NOTE
To change the Source signal assignments, see section 9-3-4 “Source Select”. For
details on how to set downmix, see section 9-3-9 “5.1Ch Down Mix”.
IMPORTANT
To use AES audio signals 1/2 through 7/8 for Source, the AES connector must be set
to be used for input. See AES 1/2-3/4 IO Setting and AES5/6-7/8 IO Setting in section
9-4-2 “Audio System” for details.
To Next Page
Loading...
