99
Auto channel pairing example (on NON-PCM inputs):
Conditions:
NON-PCM inputs in SOURCE 1 and 2
PCM inputs in SOURCE 3 through 16
Entered value Menu display Auto channel pairing
CH1: SOURCE1
CH2: SOURCE2
CH1: SOURCE1
CH2: SOURCE2
CH1: SOURCE1
CH2: SOURCE2
Unchanged. The selected L/R channels are a
correct NON-PCM channel pair.
CH1: SOURCE3
CH2: SOURCE5
CH1: SOURCE3
CH2: SOURCE5
CH1: SOURCE3
CH2: SOURCE5
Unchanged. The selected L/R channels are
PCM audio signals.
CH1: SOURCE1
CH2: SOURCE1
CH1: SOURCE1
CH2: ＊SOURCE2
CH1: SOURCE1
CH2: SOURCE2
Changed to make a proper pair including the
assigned L channel signal. The selected L/R
channels are the same channel of a
NON-PCM channel pair.
CH1: SOURCE2
CH2: SOURCE2
CH1: ＊SOURCE1
CH2: SOURCE2
CH1: SOURCE1
CH2: SOURCE2
Changed to make a proper pair including the
assigned L channel signal. The selected L/R
channels are the same channel of a
NON-PCM channel pair.
CH1: SOURCE4
CH2: SOURCE2
CH1: ＊SOURCE3
CH2: ＊SOURCE4
CH1: SOURCE3
CH2: SOURCE4
Changed to make a proper pair including the L
channel assigned signal. PCM and NON-PCM
signals are selected for L/R channels.
CH1: SILENCE
CH2: SOURCE2
CH1: SILENCE
CH2: ＊SILENCE
CH1: SILENCE
CH2: SILENCE
Changed to make a proper pair including the
assigned L channel signal. SILENCE and
NON-PCM signals are selected for L/R
channels.
CH1: 500Hz
CH2: SOURCE2
CH1: 500Hz
CH2: ＊500Hz
CH1: 500Hz
CH2: 500Hz
Changed to make a proper pair including the
assigned L channel signal. 500Hz and
NON-PCM signals are selected for L/R
channels. (1KHz signal will be processed the
same.)
CH1: DOWNMIX－L
CH2: SOURCE3
CH1: DOWNMIX－L
CH2: SOURCE3
CH1: DOWNMIX－L
CH2: SOURCE3
Unchanged. DOWNMIX-L and PCM signals
are selected for L/R channels.
CH1: DOWNMIX－L
CH2: SOURCE2
CH1: DOWNMIX－L
CH2: ＊ DOWNMIX－R
CH1: DOWNMIX－L
CH2: DOWNMIX－R
Changed to make a proper pair including the
assigned L channel signal. DOWNMIX-L and
NON-PCM signals are selected for L/R
channels.
CH1: Dolby ENC 1
CH2: 1KHz
CH1: Dolby ENC 1
CH2: ＊ Dolby ENC 2
CH1: Dolby ENC 1
CH2: Dolby ENC 2
Changed to make a proper pair including the
assigned L channel signal. NON-PCM and
1KHz signals are selected for L/R channels.
To Next Page
Loading...
