FOR-A FA-9500 - Page 3

iii
Version
*1
Supported
Feature/Option
Note
FPGA1: 2.30 or higher
FPGA2: 4.10 or higher
FPGA3: 1.02 or higher
SOFT: 5.00 or higher
Logo Generator Supports Logo Generator
FA-95RU ver 4.00 or higher-compatible
FPGA1:3.14 or higher
FPGA2: 5.02 or higher
FPGA3: 1.02 or higher
SOFT: 6.00 or higher
Added performance
features.
S2016/VI/WSS AFD support,
CONV2 Up/Down/Cross converter support, and
FA-95DE-E option enhanced encoding function.
FA-95RU ver 5.00 or higher-compatible
FPGA1:3.15 or higher
FPGA2: 5.10 or higher
FPGA3: 1.02 or higher
SOFT: 6.01 or higher
Added performance
features.
SD-SDI VITS output support
*1 Version information can be seen as described in section 7-5 “UNIT Ver.”.