FOR-A FA-9500 User Manual

vii
Installing the AC Cord Retaining Clip
Secure the AC cord with the supplied ladder strap/retaining clip assembly to prevent accidental
removal from the FA-9500.
 Installing the clip
1) Wrap the retaining clip around the AC cord. (with the anchor of the ladder strap toward the
unit.)
2) Insert the anchor into the hole next to the AC IN socket.
3) Lightly fasten the clip around the AC cord.
4) Plug in the power cord.
5) Slide the clip on the ladder strap toward the plug.
6) Fasten the clip tightly.
7) Gently pull on the AC cord to ensure it is secured.
 Unpluging the AC cord
1) Push the tab on the retaining up to unfasten the clip.
2) Push the tab on the ladder strap up and slide the clip back.
3) Unplug the AC cord.
2)
4)
3)
5)
6)
1)
2)

FOR-A FA-9500 Specifications

General

Brand	FOR-A
Model	FA-9500
Category	Signal Processors
Language	English