FOR-A HVS-XT100 - Page 226

226
Interfaces
LAN
100Base-TX/1000BASE-T RJ-45 x 1
GPI IN/TALLY OUT
25-pin D-sub (female) x 1 (inch screw)
24-input/output (GPI input/output and tally output programmable)
Open collector or no-voltage contact input, relay contact output
RS-422
9-pin D-sub (female) x 2 (with inch screws)
* For HVS-30RU, VTR, router, tally unit and editor connection
USB MEMORY
(Front side)
For USB flash drive connection, USB1.1, Type A connector x 1
Temperature
0°C to 40°C
Humidity
30% to 90% (no condensation)
Power
100VAC to 240 VAC ±10%, 50/60Hz
DC 12V / 16 A (Supplied from the AC adaptor)
Consumption
100 W (at 100-120 VAC)
99 W (at 220-240 VAC)
Dimensions
420 (W) x 246 (D) x 129.3 (H) mm
Weight
2.6 kg
Consumables
Power supply unit: Replace every 5 years.
HVS-XT110PSM: Replace every 5 years.
Cooling fan: Replace every 4 years