Step 16
Pull the power terminal adapter up and away from the blade.
Figure 122
Pulling Power Terminal Adapter
Step 17
Before unpacking the replacement blade, inspect the shipping containers for signs of damage.
Note: Claims for shipping damage must be led with the transportaon company in accordance with their
published procedure. Contact Fujitsu Sales Representave for any shipment quesons.
Step 18
Unpack and carefully remove the replacement blade from its shipping container and place it on a clean, level,
and ESD-safe surface. Use two hands as shown in the following gure to remove a blade unit from container.
Note: Leave the blade in the ESD-protecve plasc bag unl ready for installaon.
System Maintenance
Equipment Replacement
376
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only
To Next Page
Loading...
Need help?
General