GE Discovery LS - Figure 7-5: PET Gantry Drive Mechanism Sub-Assemblies (View 1)

GE HEALTHCARE
DIRECTION 2307224-100, REVISION 6DISCOVERY LS SYSTEM SERVICE MANUAL
Page 228 Chapter 7 - Gantry
2.) Refer to Figure 7-5. To assemble the new unit, put the tracking Trapezoidal Nut, P/N 2294692,
into the Nut Bearing Housing, P/N HB60002064.
Figure 7-5: PET Gantry Drive Mechanism Sub-Assemblies (View 1)
3.) Fasten the tracking trapezoidal nut into position with the external Retaining Ring shown in
Figure 7-4 (30 mm diameter), P/N HB70020300M.
Tracking Trapezoidal Screw
Small Bearing Unit
Tracking Bearing Basis
Adjustable Baseplate
Distances