GE HEALTHCARE
DIRECTION 2307224-100, REVISION 6DISCOVERY LS SYSTEM SERVICE MANUAL
Page 34 Chapter 1 - Preface
For field replacement units for the CT components, refer to one of these manuals:
• LightSpeed 2.X Illustrated Parts List, Direction 2243316-100 (for 4-slice SDAS Systems)
• LightSpeed 3.X Illustrated Parts List, Direction 2296442-100 (for 4 or 8-slice MDAS Systems)
• LightSpeed 4.X Illustrated Parts List, Direction 2341961-100 (for 16-sice MDAS Systems)
For electrical diagrams for the CT components, refer to one of these manuals:
• LightSpeed 2.X Schematics Manual, Direction 2243317-100 (for 4-slice SDAS Systems)
• LightSpeed 3.X Schematics Manual, Direction 2296441-100 (for 4 or 8-slice MDAS Systems)
• LightSpeed 4.X Schematics Manual, Direction 2341962-100 (for 16-slice MDAS Systems)
For CT planned maintenance, refer to the CT Planned Maintenance Procedures CD-ROM,
Direction 5112972-200.
For the PET components:
• For general PET service information, refer to Advance PET Imaging System Service Manual,
Direction 2100507.
• For PET component FRUs, refer to the PET Advance NXi System Illustrated Parts List, Direction
2286765-100.
• For PET repair procedures, refer to the Advance PET Imaging Repair Procedures, Direction
2100323.
• For PET planned maintenance, refer to the PET Advance Imaging System Planned Maintenance
Manual, Direction, 2240409-100.
1.4 Required Skill Set and Tools
1.4.1 Training Requirements (Skill Set Required)
NOTICE All mechanical installers must meet these minimum requirements.
Only people trained and experienced in the service process of a GE PET Discovery scanner should
perform the work described in this document. All training records will be kept and verified in My
Learning.
PERSONAL SAFETY EQUIPMENT:
• Safety shoes*
• LOTO kit* -- Must have approved GE LOTO kit
• Safety glasses*
• Leather gloves
• Hearing protection*
• Knee pads
• 6 or 8 ft. step ladders
* Required items
To Next Page
Loading...
