GE Discovery LS - Switching off Power to PET Subsystems and Peripherals; Figure 3-15: CT Computer; Figure 3-16: PET Computer

GE HEALTHCARE
DIRECTION 2307224-100, REVISION 6DISCOVERY LS SYSTEM SERVICE MANUAL
Chapter 3 - DLS System Functional Description Page 97
a.) To turn off the system, press the [Power] button on the CT computer.
Figure 3-15: CT Computer
b.) To restart the system, click [Restart] or press any key on the keyboard.
4.) To shutdown the PET computer, press the [Power] button on the Sun computer.
Figure 3-16: PET Computer
3.11.2 Switching OFF Power to PET Subsystems and Peripherals
In the current release, the system shutdown procedure shuts down the CT subsystems only. The
PET subsystems shut-down procedure is described below.
To switch OFF power to PET subsystems and peripherals:
1.) If necessary, turn OFF the PET computer power switch.
2.) Turn off all the OWS peripherals plugged into the distribution box.
3.) Refer to Figure 3-17. Switch the PDU circuit breakers, located on the back side of the
Power button
Power Button