Honeywell E-Class Series - Page 59

Parameter
Name
Parameter Value / Range Units / Interpretation
Command
Equivalent
Column
Adjust Fine
Tune
CF + / – dots
Resolution specific
(see Column, Present, &
Row Adjust Fine Tune
Range).
N/A
Column Offset CO 0 – 9999 1/100 in. or 1/10 mm Cnnnn
Comm Heat
Commands
CH
Y, N
1, 0
Y = Enabled,
N = Disabled,
1 = Enabled,
0 = Disabled
N/A
Comm Speed
Commands
CS
Y, N
1, 0
Y = Enabled,
N = Disabled,
1 = Enabled,
0 = Disabled
N/A
Comm TOF
Commands
CT Y, N
Y = Enabled,
N = Disabled
N/A
Configuration
Upgrade
Package
Parameters
CU
See CU
command
details.
See CU command details. N/A
Continuous
Label Length
CL 0 – 9999 1/100 in. or 1/10 mm <STX>c
Control Codes CC S, 1, 2
S = Standard,
1 = Alternate,
2 = Alternate-2
N/A
Cutter
Equipped
CE
A/Y, E, N/D
A, E/Y, N
A or Y = Auto,
E = Enabled,
N or D = Disabled,
A = Auto,
E or Y = Enabled,
N = Disabled
<STX>V
39
DPLCommand Reference