Huawei Quidway S9300

[P] interface loopback 1
[P-LoopBack1] ip address 4.4.4.4 32
[P-LoopBack1] quit
[P] interface vlanif 20
[P-Vlanif20] ip address 100.13.1.2 30
[P-Vlanif20] quit
[P] interface vlanif 30
[P-Vlanif30] ip address 100.34.1.1 30
[P-Vlanif30] quit
[P] ospf 1
[P-ospf-1] area 0
[P-ospf-1-area-0.0.0.0] network 4.4.4.4 0.0.0.0
[P-ospf-1-area-0.0.0.0] network 100.13.1.0 0.0.0.3
[P-ospf-1-area-0.0.0.0] network 100.34.1.0 0.0.0.3
[P-ospf-1-area-0.0.0.0] quit
[P-ospf-1] quit
# Configure PE3.
[PE3] interface loopback 1
[PE3-LoopBack1] ip address 3.3.3.3 32
[PE3-LoopBack1] quit
[PE3] interface vlanif 30
[PE3-Vlanif30] ip address 100.34.1.2 30
[PE3-Vlanif30] quit
[PE3] ospf 1
[PE3-ospf-1] area 0
[PE3-ospf-1-area-0.0.0.0] network 3.3.3.3 0.0.0.0
[PE3-ospf-1-area-0.0.0.0] network 100.34.1.0 0.0.0.3
[PE3-ospf-1-area-0.0.0.0] quit
[PE3-ospf-1] quit
# Configure PE2.
[PE2] interface loopback 1
[PE2-LoopBack1] ip address 2.2.2.2 32
[PE2-LoopBack1] quit
[PE2] interface vlanif 40
[PE2-Vlanif40] ip address 100.12.1.2 30
[PE2-Vlanif40] quit
[PE2] ospf 1
[PE2-ospf-1] area 0
[PE2-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
[PE2-ospf-1-area-0.0.0.0] network 100.12.1.0 0.0.0.3
[PE2-ospf-1-area-0.0.0.0] quit
[PE2-ospf-1] quit
After the configuration, run the display ip routing-table command on the PEs, and you can see
that PE1 and PE2, and PE1 and PE3 have learned the routes on the Loopback1 interface of each
other.
Take the display on PE1 for example.
<PE1> display ip routing-table
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 13 Routes : 13
Destination/Mask Proto Pre Cost Flags NextHop Interface
1.1.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
2.2.2.2/32 OSPF 10 2 D 100.12.1.2 Vlanif40
3.3.3.3/32 OSPF 10 3 D 100.13.1.2 Vlanif20
4.4.4.4/32 OSPF 10 2 D 100.13.1.2 Vlanif20
100.12.1.0/30 Direct 0 0 D 100.12.1.1 Vlanif40
100.12.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
100.12.1.2/32 Direct 0 0 D 100.12.1.2 Vlanif40
100.13.1.0/30 Direct 0 0 D 100.13.1.1 Vlanif20
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 5 PWE3 Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-77