Intel D50DNP Series - Table 6. 2 U Management Module Specific Features; Table 7. Intel Data Center GPU Max Series Accelerator Specific Features

Intel® Server D50DNP Family Integration and Service Guide
108
Table 6. 2U Management Module Specific Features
Feature Description
Maximum
Processor Thermal
Design Power (TDP)
• Up to 350 W
Memory Support
• Up to 16 DDR5 RDIMMs or 8 DDR5 RDIMMs plus 8 Intel® Optane™ PMem 300 series modules
Expansion Options
Riser Slots
Riser Slot 1 supports 2U dual PCIe* slot riser card assembly (iPC DNP2UMRISER)
• with two PCIe 5.0 x16 slots, each supporting one low profile PCIe add-in card.
• PCIe lanes for the bottom slot are routed from CPU 0.
• PCIe lanes for the top slot are routed from the CPU 1 through an MCIO* cable.
• PCIe lanes for the U.2 SSD are routed from the CPU 1.
Riser Slot 2 supports 2U dual PCIe slot riser card assembly (iPC DNP2UMRISER)
• with two PCIe 5.0 x16 slots, each supporting one low profile PCIe add-in card.
• PCIe lanes for the bottom slot are routed from CPU 0.
• PCIe lanes for the top slot are routed from the CPU 1 through an MCIO cable.
• PCIe lanes for the U.2 SSD are routed from the CPU 0.
• Both 1U and 2U risers can accommodate one SATA or PCIe 3.0 NVMe* 80/110mm M.2 SSD drive. SATA
and PCIe lanes are routed from the Intel® C741 chipset
• The PCIe slots in 2U riser cards provide up to 25 W of power.
• PCIe lanes routed from processor/chipset support Intel® VMD.
Table 7. Intel® Data Center GPU Max Series Accelerator Specific Features
Feature Description
Maximum Processor
Thermal Design
Power (TDP)
• Up to 350 W
GPU Support
• Four Intel® Data Center GPU Max Series GPUs in OAM form factor and a maximum TDP of 600W each.
All four GPUs must always be present.
Memory Support
• 16 DDR5 RDIMMs
Riser Slots
Riser Slot 1 supports 1U single PCIe* slot riser card assembly (iPC DNP1UMRISER)
• with single PCIe 5.0 x16 slot supporting one low profile PCIe add-in card.
• PCIe 5.0 lanes routed from CPU 1 through an MCIO cable.
Riser Slot 2 supports 1U single PCIe slot riser card assembly (iPC DNP1URISER)
• with single PCIe 5.0 x16 slot supporting one low profile PCIe add-in card.
• PCIe 5.0 lanes routed from CPU 0.
• Each 1U riser can accommodate one SATA or PCIe 3.0 NVMe* 80/110mm M.2 SSD drive. SATA and PCIe
lanes are routed from the Intel® C741 chipset
• The PCIe slots in 1U riser cards provide up to 25 W of power.
•
PCIe lanes routed from processor/chipset support Intel® VMD.