Intel D50DNP Series - Riser Card and Pcie Add-In Card Replacement; Figure 187. 1 U MCIO* Riser Card

Intel® Server D50DNP Family Integration and Service Guide
146
7.5 Riser Card and PCIe Add-In Card Replacement
The Intel® Server D50DNP Family supports either up to two (1U modules) or up to four (2U modules) low-
profile PCIe* add-in cards.
This section provides assembly and installation procedures for modules that require low-profile add-in card
installation. The following procedures apply to both 1U and 2U modules in both air-cooled and liquid-
cooled configurations.
Note: The PCIe* accelerator module has additional support for up to four full-height, full-length, and
double-width PCIe* cards. Follow the replacement procedures in Section 7.9 for those cards.
Required Tools and Supplies
• Intel riser card spare kit
• Anti-static wrist strap and conductive workbench pad (recommended)
• Phillips* head screwdriver #1 and #2
Available Riser Card Options
• 1U MCIO* riser card (installed in 1U riser assembly) for 1U module
• 1U Standard riser card (installed in 1U riser assembly) for 1U module
• 2U riser card (installed in 2U riser assembly) for 2U module
Figure 187. 1U MCIO* Riser Card