Intel D50DNP Series - Figure 78. Pcie* Accelerator Module Riser Card 1 Front View; Figure 79. Pcie* Accelerator Module Riser Card 2 Front View

Intel® Server D50DNP Family Integration and Service Guide
73
Figure 78. PCIe* Accelerator Module Riser Card 1 Front View
Figure 79. PCIe* Accelerator Module Riser Card 2 Front View
The PCIe* accelerator modules support the following types of accelerator add-in cards:
• Nvidia* Tesla* A100
• Programmable acceleration card with the Intel® Stratix® 10 SX FPGA
• Intel® Data Center GPU Max Series-based PCIe x16 accelerator add-in card
• Intel® Ethernet Network Adapter E810 Series
Each accelerator add-in card requires corresponding PCIe* accelerator module card Kit matching the card
type. Each kit includes the front bracket and optionally rear extension bracket and power cable. The card kit
is an accessory option and must be ordered separately for each card.
Note: Mixed types of accelerator add-in cards in a single module are not supported.
Required Tools and Supplies
• PCIe* accelerator add-in card
• PCIe* accelerator module card Kit matching the card type
• Anti-static wrist strap and conductive workbench pad (recommended)
• Phillips* head screwdriver #1
Note: The following steps to replace the accelerator add-in card metal bracket should be performed along
with the instructions in the add-in card documentation.