Intel D50DNP Series - Table 19. MRC Fatal Error Codes

Intel® Server D50DNP Family Integration and Service Guide
204
Table 19. MRC Fatal Error Codes
MRC fatal
error code
(Hex)
Upper Nibble
Lower Nibble
MRC fatal error code explanation
(with MRC internal minor code)
8h
4h
2h
1h
8h
4h
2h
1h
E8 1 1 1 0 1 0 0 0
No usable memory error.
01h = No memory was detected from SPD read, or invalid configuration
that causes no operable memory.
02h = Memory DIMMs on all channels of all sockets are disabled due to
hardware memory test error.
03h = No memory installed. All channels are disabled.
E9 1 1 1 0 1 0 0 1
Memory is locked by Intel® TXT and is inaccessible.
EA 1 1 1 0 1 0 1 0
DDR5 channel training error.
01h = Error on read DQ/DQS (Data/Data Strobe) initialization.
02h = Error on receive enable.
03h = Error on write leveling.
04h = Error on write DQ/DQS (Data/Data Strobe.
EB 1 1 1 0 1 0 1 1
Memory test failure.
01h = Software memory test failure.
02h = Hardware memory test failed.
ED 1 1 1 0 1 1 0 1
DIMM configuration population error.
01h = Different DIMM types (RDIMM, 3DS-RDIMM) are detected
installed in the system.
02h = Violation of DIMM population rules.
03h = The third DIMM slot cannot be populated when QR DIMMs are
installed.
04h = UDIMMs are not supported.
05h = Unsupported DIMM voltage.
EF 1 1 1 0 1 1 1 1
Indicates a CLTT table structure error.