Lexmark Optra W810 - Page 123

Diagnostic Information 2-15
4023-001
39 Complex Page This message is
displayed when the
page is too complex to
print.
•Press
Go to clear the
message and continue
printing. Some data may
not print or may not print
correctly.
• Cancel the print job.
Press
Menu> or <Menu.
The Job Menu is dis-
played. Press
Menu> or
<Menu until Cancel Job
appears on the second
line. Press
Select.
• To avoid another Com-
plex Page error:
– Set Page Protect On
from the Setup Menu
and re-send the job.
– Reduce the
complexity of the page
by using fewer fonts,
macros, and graphics.
– Install additional
printer memory.
50 PPDS Error See operator manual.
51 Defective Flash The printer detects a
defective flash during
power on, or during for-
mat and write to flash
operations.
•Press Go to clear the
message. Flash opera-
tions are not allowed
until the problem is
resolved.
• Remove the defective
flash memory card and
try another.
Message Description Action