Diagnostic Aids 3-11
4023-001
Duplex Tests
Duplex Quick Test
The Duplex Quick Test is used to verify that the duplex Top Margin is
set correctly. This test prints a duplex version of the Quick Test page
that can be used to adjust the Top Margin for the backside of the
page.
1. Enter the Diagnostic mode. See “Diagnostics Mode” on
page 3-1.
2. Select [DUPLEX TESTS].
3. Select [Quick Test].
4. Select [Single] or [Continuous].
– The following message displays while printing:
Quick Test
Printing...
5. Press Return or Stop to stop continuous print.
6. Press Return to go back to Diagnostics mode main menu.
You have the option of printing one duplex page (Single) or
continuously printing duplex pages until Return or Stop is pressed
(Continuous).
Note: The duplex quick test page should be printed on Letter or A4
paper.
While the page is printing the following message displays. The
power indicator also blinks while the page is printing.
Quick Test
Printing...
To Next Page
Loading...
