3-4 Service Manual
4023-001
Diagnostics Mode Tests
Printing Menu Settings Page
To print the menus page:
1. Enter the Diagnostic mode. See “Diagnostics Mode” on
page 3-1.
2. Select print menus from the Utilities menu.
– The printer automatically exits the operator panel menus and
prints the menus page. The Printing Menu Settings message
displays and the power indicator blinks while the page is
formatted and printed.
Quick Test Printing
The printer attempts to print the quick test page from the paper
source for which the registration adjustments are currently being
made. The page consists of alignment diamonds, horizontal lines
used for skew adjustment, the page count setting, printer serial
number, code levels, and print registration settings. The power
indicator also blinks while the page is printing. When the quick test
has successfully printed, the panel returns to the prior level of the
menu.
Diagnostics–Print Tests
Input Source Print Tests
The diagnostic input source print tests may be used to verify that the
printer can print on media from each of the installed print sources.
Each of the installed sources is available as a selectable option
within the print tests menu. For each source, the user has two
choices.
1. Enter the Diagnostic mode. See “Diagnostics Mode” on
page 3-1.
2. Select [PRINT TESTS].
3. Select input source you want.
4. Select [Single] or [Continuous].
– The following message displays while printing:
To Next Page
Loading...
