Repair Information 4-13
4023-001
Resetting Fuser Counter
When the fuser/fuser mmkit is replaced, the fuser page counter must
be reset.
1. Turn the printer off.
2. Press Select and Return as you turn the machine on.
3. Select MAINT COUNTER from the Configuration Menu Group.
4. Scroll to Reset Fuser and press Select. The fuser page counter
resets while the following message displays:
Resetting
Fuser Count
Resetting Transfer Counter
When the transfer roll/transfer mmkit is installed, the transfer page
counter must be reset.
1. Turn the printer off.
2. Press Select and Return as you turn the machine on.
3. Select MAINT COUNTER from the Configuration Menu Group.
4. Scroll to Reset Transfer and press Select. The transfer page
counter resets while the following message displays:
Resetting
Transfer Count
To Next Page
Loading...
