DMTA-10004-01EN, Rev. D, November 2016
Instrument Description
21
• Selection of password-protected lockout functions
• Selectable resolution: low of 0.1 mm (0.01 in.), standard of 0.01 mm (0.001 in.), or
high (optional) of 0.001 mm (0.0001 in.) [option not available for all transducers]
A-Scan and B-Scan Display Options
• Real-time A-scan waveform display for verification of critical measurements
• Manual freeze mode with post processing
• Manual zoom and range control of waveform display
• Auto hold on LOS and auto zoom (measured echo centering)
• Extended blank
• Blank after first received echo in echo-to-echo mode
• Receiver gain readout
• Ability to capture and display waveform associated with minimum thickness
during scanned measurements
• Display stored and downloaded waveforms
Internal Datalogger Functions
• Internal data storage and possibility to export data to a removable microSD
memory card
• Capacity to store 475000 fully-documented thickness readings or
20000 waveforms with thickness readings
• Database enhancements include 32-character file naming and 20-character ID
naming
• Automatic ID number increments following a preset sequence, or manual ID
numbering using the keypad
• Save reading/waveform to an ID number
• Simultaneously show ID number, stored comments, and stored reference
thickness while displaying active thickness and waveform
• Nine file formats available
• Erase selected data or all stored data
• Save or send an held or frozen reading to the thickness display
• Transmit selected data or all stored data
• Keypad-programmable communication parameters
• Standard USB and RS-232 directional communication
To Next Page
