DMTA-10004-01EN, Rev. D, November 2016
Software User Interface Elements
47
To edit an alphanumeric parameter value using the traditional method
1. Select an alphanumeric parameter.
2. Use the [] and [] keys to select the character that you wish to enter. Hold down
the key to quickly cycle through the letters, numbers, and special characters.
3. Use the [] keys to move to the next character.
4. Repeat the steps 2 and 3 to enter other characters.
5. If you need to move the position of the cursor in the value text box, use the [] or
[] key.
6. To insert a character at the cursor position, press [CAL ZERO].
The character at the cursor and all those to the right moves one position to the
right, making a space for a new character.
7. To delete the character at the cursor position, press [CAL VEL].
The character at the cursor is deleted and any characters to the right move to the
left by one position.
8. Press [ENTER] to accept the character string and move to the next parameter.
To Next Page
Loading...
