12.6 F: OPTIONS
560 SIEPCYEUOQ2V01A Q2V Technical Manual
■ F7-04: IP Address 4
No.
(Hex.)
Name Description
Default
(Range)
F7-04
(03E8)
IP Address 4
Sets the fourth octet of the IP Address for the device that is connecting to the network. Restart the
drive after you change this parameter.
20
(0 - 255)
Note:
When F7-13 = 0 [Addr Mode@Startup = Static]:
• Use parameters F7-01 to F7-04 to set the IP Address. Be sure to set a different IP address for each drive on the network.
• Also set parameters F7-01 to F7-12.
■ F7-05: Subnet Mask 1
No.
(Hex.)
Name Description
Default
(Range)
F7-05
(03E9)
Subnet Mask 1
Sets the first octet of the subnet mask of the connected network.
255
(0 - 255)
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
■ F7-06: Subnet Mask 2
No.
(Hex.)
Name Description
Default
(Range)
F7-06
(03EA)
Subnet Mask 2
Sets the second octet of the subnet mask of the connected network.
255
(0 - 255)
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
■ F7-07: Subnet Mask 3
No.
(Hex.)
Name Description
Default
(Range)
F7-07
(03EB)
Subnet Mask 3
Sets the third octet of the subnet mask of the connected network.
255
(0 - 255)
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
■ F7-08: Subnet Mask 4
No.
(Hex.)
Name Description
Default
(Range)
F7-08
(03EC)
Subnet Mask 4
Sets the fourth octet of the subnet mask of the connected network.
0
(0 - 255)
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
■ F7-09: Gateway Addr 1
No.
(Hex.)
Name Description
Default
(Range)
F7-09
(03ED)
Gateway Addr 1
Sets the first octet of the gateway address of the connected network.
192
(0 - 255)
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
■ F7-10: Gateway Addr 2
No.
(Hex.)
Name Description
Default
(Range)
F7-10
(03EE)
Gateway Addr 2
Sets the second octet of the gateway address of the connected network.
168
(0 - 255)
To Next Page
Loading...
Need help?
General